Search CVEs

Yubico YubiKey 5 Series devices with firmware before 5.7.0 and YubiHSM 2 devices with firmware before 2.4.0 allow an ECDSA secret-key extraction attack (that requires physical access and expensive equ

Issue summary: Use of the low-level GF(2^m) elliptic curve APIs with untrusted explicit values for the field polynomial can lead to out-of-bounds memory reads or writes. Impact summary: Out of bound

Generating the ECDSA nonce k samples a random number r and then truncates this randomness with a modular reduction mod n where n is the order of the elliptic curve. Meaning k = r mod n. The division

Issue summary: A timing side-channel which could potentially allow recovering the private key exists in the ECDSA signature computation. Impact summary: A timing side-channel in ECDSA signature compu

Ubiquiti UniFi Network Controller prior to 5.10.12 (excluding 5.6.42), UAP FW prior to 4.0.6, UAP-AC, UAP-AC v2, and UAP-AC Outdoor FW prior to 3.8.17, USW FW prior to 4.0.6, USG FW prior to 4.4.34 us

DPA countermeasures are unavailable for ECDH key agreement and EdDSA signing operations on Curve25519 and Curve448 on all Series 2 modules and SoCs due to a lack of hardware and software support. A su

A missing authorization vulnerability in Zyxel ATP series firmware versions from V4.32 through V5.40, USG FLEX series firmware versions from V4.50 through V5.40, USG FLEX 50(W) series firmware version

The Semtech LR11xx LoRa transceivers running early versions of firmware contains an information disclosure vulnerability in its firmware validation functionality. When a host issues a firmware validit

OpenSSL 3.0.0 through 3.3.2 on the PowerPC architecture is vulnerable to a Minerva attack, exploitable by measuring the time of signing of random messages using the EVP_DigestSign API, and then using

A side-channel attack, which requires a physical presence to the TPM, can lead to extraction of an Elliptic Curve Diffie-Hellman (ECDH) key.

An issue was discovered in Siklu Communications Etherhaul 8010TX and 1200FX devices, Firmware 7.4.0 through 10.7.3 and possibly other previous versions. The rfpiped service listening on TCP port 555 w

The ECDSA implementation of the Elliptic package generates incorrect signatures if an interim value of 'k' (as computed based on step 3.2 of RFC 6979 https://datatracker.ietf.org/doc/html/rfc6979 ) h

This vulnerability exists in ZKTeco WL20 due to hard-coded private key stored in plaintext within the device firmware. An attacker with physical access could exploit this vulnerability by extracting t

Cryptographic issues while generating an asymmetric key pair for RKP use cases.

Yadea T5 Electric Bicycles (models manufactured in/after 2024) have a weak authentication mechanism in their keyless entry system. The system utilizes the EV1527 fixed-code RF protocol without impleme

An issue was discovered in Samsung eMMC with KLMAG2GE4A and KLM8G1WEMB firmware. Code bypass through Electromagnetic Fault Injection allows an attacker to successfully authenticate and write to the RP

IBM Common Cryptographic Architecture 7.0.0 through 7.5.51 could allow a remote attacker to obtain sensitive information during the creation of ECDSA signatures to perform a timing-based attack.

Yubico YubiKey 5.4.1 through 5.7.3 before 5.7.4 has an incorrect FIDO CTAP PIN/UV Auth Protocol Two implementation. It uses the signature length from CTAP PIN/UV Auth Protocol One, even when CTAP PIN/

RustCrypto: Elliptic Curves is general purpose Elliptic Curve Cryptography (ECC) support, including types and traits for representing various elliptic curve forms, scalars, points, and public/secret k

Protection mechanism failure in wolfCrypt post-quantum implementations (ML-KEM and ML-DSA) in wolfSSL on ARM Cortex-M microcontrollers allows a physical attacker to compromise key material and/or cryp